How To Install Replace Door Panel Chevy GMC Silverado Sierra Tahoe Yukon 99-02 1AAuto.com

Yes it should be the same on your vehicle.

Can you please comment about the window switch removal not being correct? Is it correct or not? I have used your videos to save myself a load of aggravation. Thank you.

Like another post here, the 2004 Suburban has the window and control cluster attached from underneath the door panel and cannot be removed from the top. The second screw to remove is next to the lock release instead of inside the door panel near the control cluster. Trying to remove the control cluster from the top may cause some damage since it is screwed in from the bottom.

Great video I am 14 and I did it all by my self and I did it perfect :)

Your right I just snaped the front screw tab , also the second screw holding the door in is located behind the door lock assembley, great vid though...!!

My speaker or woofer has come loose and hanging inside the "mesh" speaker cover. Can I pry the mesh off the door panel to access the speakers without removing the whole door panel? Thanks!!

how you remove the back speaker panel in the trunk on a 2001 chevy tahoe ls

How do you replace the bulb on the door panel light? I own a '99 silverado and the bulb is burned out. Thanks

Great Video, I had to replace the speaker in my 2000 Sierra. Easiest Iever took a door panel off.

Thanks for the Video. Just a word of caution. I broke off a plastic part in trying to use these instructons on a 2003 Yukon. While the panel looks identical to the one here, the power window swith asssembly is attached at the front end from underneath (pointy end) with a small screw that is accessed from below but only after the door panel is pulled away from the door. If you try to pry it out as shown, it'll snap!

should be the same on my 06 sierra crew cab right? Good video. I'm always afraid of tugging on things I think will snap off... but are screwed on by some hidden screw!

this was very helpful thanks

hey i have a question im swaping the doors from a 2000 tahoe to a 1992 silverado how can i wire the doors to roll the windows up and down????

Thanks for that... but what do you do when the window broke and someone raised it too high and now the glass clamps and cables are loose?

is the procedure the same for chevy tahoe 2000...i need to replaced my power window motor? thanks